THE INFLUENCE OF DISTURBING FACTORS IN THE OCCURRENCE OF VIBRATIONS IN THE SPINDLE ASSEMBLIES OF MACHINES

Authors

  • Asatillaev Yuldashali Malikovich Associate Professor, Ph.D., Namangan Engineering Construction Institute Republic of Uzbekistan, Namanagan city, 12 Islam Karimov street.

Keywords:

Vibration, disturbing, tools, workpiece, spindle, trajectory, molding.

Abstract

The article deals with an analysis of the influence of disturbing factors arising in the process of cutting the vibration of the executive bodies of machine tools. The patterns of the change in the trajectory of the instantaneous center of the rotating section of the billet are studied. The figure shows the direction of the cutting force of the relative movement of the cutting edge of the tool and the workpiece, as well as the appearance of spatial displacements caused by disturbing influences and violations specified by the law of spindle movement.

References

Sankin Yu.N. Dinamika metallorejushix stankov [Dynamics of bearing systems of metal-cutting machine tools] textbook. / Yu.N. Sankin. - M .: Mechanical Engineering, 1986. - 96p.

Yasheritsin P.I. Teoriya rezaniya [Cutting theory]. Textbook / P.I.Yasheritsin, E.E. Feldshteyn, М.А. Kornievich. – Minsk: New Knowledge, 2005. – 512 p.

Bondarenko Y.A. Texnologiya izgotovleniya detaley na stankax s CHPU [Technology for manufacturing parts on CNC machines] Allovanke / Y.А. Bondarenko, А.А. Pogonin, А.G. Sxirtladze, М.А. Fedorenko. – ed.3nd, rev.and. add. – “Stariy Oskol” TNT, 2016. - 292 с.

Kishurov V.M. Naznachenie ratsionalnix rejimov rezaniya pri mexanicheskoy obrabotke [Appointment of rational cutting modes in mechanical processing textbook]. Allowance / V.M. Kishurov, M.V. Kishurov, P.P. Chernikov, N.V. Yurasov [and others]. - Ed. 2nd, rev. and add. - SPb. : Publishing house "Lan", 2018. - 216 p.

Asatillayev Y.M. Sistematicheskie i sluchaynie oshibki v protsesse formoobrazovaniya elementov texnologicheskogo oborudovaniya [Systematik and random errors in the process of shaping of texnologikal equipment elements] Scientific and technical journal ISSN:2181-7200. FerPI, 2021. - Vol.25, №1. pp.56-60.

Asatillaev Y.M., Optimizatsiya parametrov rezaniya v zavisimosti ot glubini rezaniya i podachi [Optimization of cutting parameters depending on the depth of cutting and feed] / Asatillaev Y.M., Shermatov G.G., Mukhtorov S.A. - Scientific and technical journal ISSN:2181-7200. FerPI, 2020. - Vol.24, specialist, no. No. 3. pp.29 - 32.

Malikovich, A. Y. (2022, March). Features of the technology of cutting worms with a cutter on cnc machines. In Conference Zone (pp. 11-13).

Malikovich, A. Y. (2022, March). Development of the technological process of manufacturing and devices for technical support of the body part. In Conference Zone (pp. 9-10).

Malikovich, A. Y. (2021). Methods for Optimizing the Dynamic Characteristics of the Main Elements of Machine tools during Cutting. Design Engineering, 11104-11111.

Malikovich, A. Y. (2021). Analysis of Plastic Deformation of the Cut Layer. International Journal of Innovative Analyses and Emerging Technology, 1(5), 57-59.

Аблажевич, М. Е., & Асатиллаев, Й. М. (2020). Малогабаритный культиватор. In Научно-практические аспекты инновационного развития транспортных систем и инженерных сооружений (pp. 8-11).

Асатиллаев, Й. М., & Аблажевич, М. Е. (2022). ОСОБЕННОСТИ ВЫБОРА РЕЖИМОВ РЕЗАНИЯ ДЛЯ ОБРАБОТКИ ЛИТЫХ КОРПУСНЫХ ДЕТАЛЕЙ. Universum: технические науки, (4-2 (97)), 12-15.

Асатиллаев, Й. М., & Хайдаров, А. К. (2020). ФАКТОРЫ ПРИРОДНО-КЛИМАТИЧЕСКИХ УСЛОВИЙ, ВЛИЯЮЩИЕ НА НАДЕЖНОСТЬ И РАБОТОСПОСОБНОСТЬ МАШИН. In СОВРЕМЕННЫЕ НАПРАВЛЕНИЯ И ПОДХОДЫ К ПРОЕКТИРОВАНИЮ И СТРОИТЕЛЬСТВУ ИНЖЕНЕРНЫХ СООРУЖЕНИЙ (pp. 27-31).

Бойбобоев, Н. Г., Асатиллаев, Й. М., & Хайдаров, А. К. (2019). ТЕХНОЛОГИЧЕСКИЕ СВОЙСТВА ПОЧВЫ, ВЛИЯЮЩИЕ НА КАЧЕСТВО РАБОТЫ СЕЛЬСКОХОЗЯЙСТВЕННЫХ МАШИН. In ВКЛАД УНИВЕРСИТЕТСКОЙ АГРАРНОЙ НАУКИ В ИННОВАЦИОННОЕ РАЗВИТИЕ АГРОПРОМЫШЛЕННОГО КОМПЛЕКСА (pp. 49-54).

Хайдаров, А. К., & Асатиллаев, Й. М. (2019). О ПЕРСПЕКТИВАХ РАЗВИТИЯ МАЛЫХ ПРЕДПРИЯТИЙ, ПРОИЗВОДЯЩИХ ПРОДУКЦИЮ НА ОСНОВЕ БАЗАЛЬТА. In ВКЛАД УНИВЕРСИТЕТСКОЙ АГРАРНОЙ НАУКИ В ИННОВАЦИОННОЕ РАЗВИТИЕ АГРОПРОМЫШЛЕННОГО КОМПЛЕКСА (pp. 439-443).

Холмирзаев, У. А. (2021, October). ҚИСҚА МУДДАТЛИ ҚИММАТЛИ ҚОҒОЗЛАРНИ АНАЛИТИК ҲИСОБИНИ ТАКОМИЛЛАШТИРИШ. In " ONLINE-CONFERENCES" PLATFORM (pp. 396-399).

Abdulazizovich, K. U. (2022). IMPROVING METHODOLOGICAL APPROACHES TO FINANCIAL ASSET ACCOUNTING. INTERNATIONAL JOURNAL OF RESEARCH IN COMMERCE, IT, ENGINEERING AND SOCIAL SCIENCES ISSN: 2349-7793 Impact Factor: 6.876, 16(4), 56-62.

Abdulazizovich, K. U. IMPROVING THE REFLECTION OF MONEY AND CASH EQUIVALENT IN THE ACCOUNTING BALANCE. Dear Academicians & Research Scholars, 55.

Kamolov, A. A., & Xolmirzayev, U. A. (2018). Economic Laws And Categories. Экономика и социум, (2), 34-36.

Убайдуллаев, Т., & Холмирзаев, У. (2019). ФАКТОРЫ И ТЕНДЕНЦИИ ЭКОНОМИЧЕСКОГО РОСТА. Мировая наука, (1), 299-302.

Abdulazizov, K. U., Sherzod, I., & Abdulkhodinevna, S. M. (2022). IMPROVING THE METHODOLOGICAL BASIS OF ACCOUNTING FOR FINANCIAL ASSETS. INTERNATIONAL JOURNAL OF SOCIAL SCIENCE & INTERDISCIPLINARY RESEARCH ISSN: 2277-3630 Impact factor: 7.429, 11, 34-39.

Abdulazizovich, X. U. B., Qutbiddinovich, S. I., & Sobirjon o’g’li, J. E. (2021). POSITIVE ASPECTS OF THE CASH METHOD IN SMALL BUSINESSES IN A PANDEMIC ENVIRONMENT. American Journal of Economics and Business Management, 4(3), 1-8.

Khakimov, B., & Kholmirzayev, U. (2020). IMPROVING CASH ACCOUNTING AND ANALYSIS ON THE BASIS OF INTERNATIONAL EXPERIENCES. International Finance and Accounting, 2020(1), 18.

Hakimov, B., Yunusov, M., & Holmirzayev, U. (2018). Elaboration of The Balance Sheet Liquidity Analysis-Requirements of The Period. International Finance and Accounting, 100.

Ogli, I. S. H., & Oglu, O. I. A. Peculiarities of the Development of Industrial Production in Namangan Region. Volume, 9, 544-547.

Abdullayevich, A. O., & Abdullajanovich, U. T. (2021, December). DEVELOPMENT OF SMALL BUSINESS AND PRIVATE ENTREPRENEURSHIP IN UZBEKISTAN. In Conference Zone (pp. 123-128).

Abdullajanovich, U. T. (2022, March). THE ROLE OF INDUSTRIAL ENTERPRISES IN THE DEVELOPMENT OF THE NATIONAL ECONOMY. In Conference Zone (pp. 271-276).

Abdullajanovich, U. T. (2021). THE MAIN DIRECTIONS OF DIVERSIFICATION OF EXPORTS OF INDUSTRIAL PRODUCTS ON THE BASIS OF LOCALIZATION. Galaxy International Interdisciplinary Research Journal, 9(12), 70-75.

Abdullayevich, A. O., & Abdullajanovich, U. T. Ibrogimov Sherzodbek Halimjon ogli.(2021). Development of small business and private entrepreneurship in Uzbekistan. Conference Zone, 123–128.

Downloads

Published

2022-12-20

How to Cite

Asatillaev Yuldashali Malikovich. (2022). THE INFLUENCE OF DISTURBING FACTORS IN THE OCCURRENCE OF VIBRATIONS IN THE SPINDLE ASSEMBLIES OF MACHINES. INTERNATIONAL JOURNAL OF RESEARCH IN COMMERCE, IT, ENGINEERING AND SOCIAL SCIENCES ISSN: 2349-7793 Impact Factor: 6.876, 16(12), 7–11. Retrieved from https://gejournal.net/index.php/IJRCIESS/article/view/1547